Skip to content

Air Fryer Not Turning On? 8 Checks Before You Call Service

Quick answer: If the air fryer shows no light, display or fan at all, the problem is almost always power reaching it: the socket switch is off, the MCB has tripped, the plug is loose, or the basket isn’t latched (many models won’t start without it). Check those four before assuming the appliance is faulty.

This page is for an air fryer that stays completely dead. If it starts but stops partway, see air fryer keeps turning off; if it runs but stays cold, see air fryer not heating up.

Checks in order: fastest first

Check How Time
Socket switch on Indian sockets have their own switch; make sure it’s on 5 sec
Socket has power Plug in a phone charger or lamp 30 sec
MCB not tripped Look at the distribution board for a switch that’s down 1 min
Plug fully in Large 16 A plugs can sit loose in worn sockets 30 sec
Basket latched Push the drawer in until it clicks; models with a door must be fully shut 30 sec
Correct start sequence Many digital models need the power button, then a program, then start 1 min
Cord undamaged Look for cuts, kinks or melted spots near the plug and base 1 min
Cool-down finished After overheating, some models stay off until they cool for 20–30 min 30 min

Common causes in Indian homes

  • Using a 6 A socket with an adapter. Air fryers above about 1,200 W draw more than 5 A at 230 V and should use a 16 A socket. A loose adapter can cut contact or burn. See the current table in air fryer keeps turning off.
  • Power cut on an inverter line. If the kitchen socket runs off the inverter during a cut, most inverters can’t start a 1,200–1,800 W air fryer at all.
  • Low voltage. During evening peaks some areas see voltage dip well below 230 V. Digital models may refuse to start. A stabiliser isn’t usually needed, but if lights dim and other appliances struggle, wait or try later.
  • Child lock. Some digital models (common on Agaro, Inalsa and others) have a lock icon. Hold the indicated button for 3 seconds to unlock; check your manual.

If none of that works

  1. Unplug for 10–15 minutes to let the electronics reset, then try again.
  2. If your plug has a fuse (some imported models do), replace it with the same rating.
  3. Don’t open the base. A dead unit with a good socket usually means a blown thermal fuse or a failed control board, both service jobs.
  4. Check the warranty card. Most Indian brands give 1–2 years; Philips models often carry 2 years.

Frequently asked questions

Why is my air fryer not turning on even though it’s plugged in?

Check the socket’s own switch, then whether the basket is fully latched. Most models have a safety switch that blocks power until the drawer clicks in.

Can an air fryer stop working after overheating?

Yes. Many have a thermal cut-out that keeps them off until they cool. If it never comes back, the one-time thermal fuse may have blown, which needs a service visit.

Does a power surge damage an air fryer?

It can damage the control board. Unplug the air fryer during storms and use a surge protector rated for its wattage if your area has frequent spikes.

How do I reset my air fryer?

Unplug it for 10–30 minutes, then plug it into a different socket and press power. There is no hidden reset button on most models.

More: air fryer not heating up · common air fryer mistakes · how to use an air fryer